







Free in-home design visit - walk-in showers, tub-to-shower conversions, and Kohler, Moen, and Delta fixtures planned to your exact space
Trusted Tub to Shower Conversion for Spring Valley Homeowners
That step-over tub wall gets harder to clear every year, and the caulk line behind it never quite stops staining. A tub to shower conversion replaces the tub with a low-threshold walk-in shower, so you step in flat instead of climbing over a wet ledge. We’re a bathroom-only remodeling company, which means the people who plan your conversion do nothing but bathrooms. Our technicians have up to 10 years of experience, and we carry Delta and American Standard for everyday builds and Toto and Grohe when the design calls for it. Every wet area gets waterproofed with Schluter Systems behind the tile. Call (844) 312-0122 for a free estimate on your Spring Valley bathroom.

What Our Tub to Shower Conversion Service Includes
A conversion isn’t a liner dropped over an old tub. We take out the tub, rework the drain and valve to suit the new shower, rebuild the substrate, waterproof it, tile it, and set the glass. Here’s what each part of the job covers.
Removing the old tub and prepping the alcove
The first stage is pulling the tub, the surround and any rotted backer behind it. This is where older Spring Valley homes usually show their age: desert air dries out caulk and grout joints, and slow leaks work their way into the wall cavity behind a tub apron without ever showing on the bathroom floor. We open the wall to the studs, check for soft framing and old moisture damage, and replace what’s failing before anything new goes in. If we find a surprise behind the wall, you hear about it before we keep going.

Rebuilding the drain, valve and rough plumbing
A tub drain sits lower and further toward the wall than a shower drain, so the connection has to be reworked. We reposition the drain to a centered linear or point drain, replace the mixing valve with a pressure-balancing model, and set the height for the showerhead you actually want. Most tub-to-shower conversions need a permit here, and your city’s building department is the place to confirm what your address requires. We handle the rough-in to code and make sure the inspection passes before tile goes up.

Schluter waterproofing and substrate work
This is the part nobody sees and the part that decides whether the shower lasts. We bond Schluter membrane to the substrate across the floor, up the walls and over the curb, tying the seams with the matching band and sealing the corners and pipe penetrations. Water that gets behind grout has nowhere to go in a properly built Schluter assembly, so it drains instead of soaking into framing. It’s the unglamorous detail that separates a shower that holds up from one that leaks in five years.

Tile, fixtures and a low-threshold entry
Once the waterproofing cures, we set the tile, build the curb to a low, walk-in height, and install your chosen fixtures from Delta, American Standard, Toto or Grohe. A bench, niche and grab bar blocking can go in at this stage if you’re planning for the long term. We work in bathrooms every day, so the slope, the curb height and the glass layout are set together rather than adjusted after the fact.
Glass, trim and final walkthrough
The last stage is the shower door, the trim, the caulk and a full check that the drain runs clear and the valve holds temperature. We walk the finished shower with you, show you where the water goes, and explain what to clean it with so the tile and grout stay sound. From Moen to Schluter, the parts we spec are chosen for your budget and your space, not for what happens to be on a shelf.
Styles & brands we work with
- Walk-in shower
- Tub-to-shower
- Freestanding tub
- Kohler
- Moen
- Delta
- Frameless glass
Brands We Service for Tub to Shower Conversion
We work with eight recognized fixture brands, and each one has its own habits once it’s in a shower for a few years. Delta valves are common in Spring Valley homes, and we know how their cartridges wear and where the trim attaches, so a conversion keeps the same rough-in if it’s still sound. American Standard tubs and surrounds come out of a lot of alcoves, and we’ve learned to read the backer condition behind them before we commit to a layout. Toto fixtures get installed when the design calls for a higher tier, and their valve and drain standards need to be specced correctly rather than forced into a generic rough-in. Grohe follows the same rule: European plumbing standards reward a careful plan, and they punish shortcuts.
Schluter Systems is the brand that matters most behind the wall. We use their waterproofing membrane and banding on every wet area because a shower is only as good as the assembly under the tile, and Schluter gives us a proven system instead of a painted-on guess. Whether you have Delta, American Standard, Toto, Grohe or any other make, we can help, and we’ll tell you honestly when an existing fixture is worth keeping.
Signs You Need Tub to Shower Conversion Right Now
Most conversions aren’t urgent, but a few signals mean you shouldn’t wait. Here’s what to look for.
- You’re stepping over the tub wall with a hand on the wall. A high tub apron is the number one fall risk in a bathroom, and it only gets harder to clear as balance changes. A low-threshold shower removes the step that causes the problem.
- Soft or spongy floor near the tub. A spongy floor means water has been getting past the tub surround and into the subfloor for a while. That’s a rebuild, not a cosmetic fix, and it gets more expensive the longer it sits.
- Recurring mold or peeling caulk at the tub line. Caulk that fails again and again in the same spot usually points to movement or trapped moisture behind the tub deck. A new waterproofed assembly solves it instead of hiding it.
- The tub is too deep to use comfortably. Deep soaking tubs are hard on knees and hips, and a tub you avoid is wasted space. Converting it gains usable shower area and a bathroom that fits the way you actually move.
- You’re planning for aging in place. Grab bar blocking, a bench and a flat entry are all easier to build during a conversion than to add later. If you or a parent is thinking ahead, this is the right time.
Our Tub to Shower Conversion Process – Step by Step
Here’s how a conversion runs from first call to finished shower.
- 1
Free in-home estimate. We measure the alcove, look at the existing valve and drain, and talk through what you want the finished shower to do. You get a written line-item estimate with the price set per job, so there are no change orders later for work we should have priced up front.
- 2
Layout and material selections. We settle the tile, the drain type, the curb height and the fixture brand with you. This is where the Schluter build and the barrier-free option get decided, since the floor slope and waterproofing depend on the layout.
- 3
Permits and demolition. We pull the permit your city requires, then remove the tub, surround and failing backer. Framing is inspected and repaired as needed before the rebuild begins.
- 4
Rough plumbing and waterproofing. The drain and valve are set to the new shower, then the Schluter membrane goes down across floor, walls and curb with banded seams and sealed penetrations. The inspection happens here, before tile.
- 5
Tile, glass and walkthrough. We set tile, install the shower door and trim, seal the edges, and walk the finished shower with you. You leave knowing where the water drains and how to keep the assembly sound.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Tub to Shower Conversion Cost in Spring Valley?
A typical tub-to-shower conversion in Spring Valley runs $3,500 to $10,000 depending on the size of the alcove, the tile and glass you choose, and whether we find hidden water damage behind the tub. A straightforward conversion with standard tile, a bench-free layout and a Delta or American Standard valve usually lands toward the lower end. A larger shower with premium tile, a custom glass panel, or Toto or Grohe fixtures pushes toward the top of the range.

What moves the number: tile and glass selections, the drain type, the curb height, and whether the rough plumbing needs full replacement rather than a reposition. A barrier-free entry adds framing and waterproofing work, which we price up front rather than after the fact.
How to avoid overpaying: get a written line-item estimate, confirm what’s included in demolition and haul-away, and ask whether the permit is part of the price. Don’t let a low bid win on a shower that skips the Schluter membrane, since that shortcut costs far more to fix later. Our free estimate lists the tile, fixtures, waterproofing system, permit and glass separately so you can compare bids fairly. The written estimate is what sets the final price, and we don’t change it because the job was harder than expected. Call (844) 312-0122 for your free estimate.
Tub to Shower Conversion Near Spring Valley – Our Service Area
We handle tub-to-shower conversions across Spring Valley and the surrounding valley, including Summerlin, Enterprise and Las Vegas. If you’re planning a broader update, our bathroom remodeling Spring Valley service covers the full room, and you can read more about the Spring Valley area we work in. Homeowners in Summerlin and Enterprise often book a conversion alongside a tile and vanity refresh. Estimates are scheduled around your week, and we answer the phone 24/7 to get you on the calendar.
Serving Spring Valley, NV – Our Local Coverage Area
We serve Spring Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Tub to Shower Conversion in Spring Valley

A tub to shower conversion removes an existing bathtub and builds a walk-in shower in the same alcove. It involves new rough plumbing for the drain and valve, a rebuilt and waterproofed substrate, new tile, and usually new glass. The result is a low-threshold shower you step into rather than climb over, sized to the space the tub used to occupy. Call (844) 312-0122 to talk through whether your alcove is a good fit.
Most conversions take one to two weeks from demolition to finished shower, depending on tile complexity and inspection timing. Waterproofing has to cure and the permit inspection has to clear before tile goes up, so the schedule is set by the build, not by rushing. We give you a realistic timeline in the written estimate and tell you if a material selection will add time. Call (844) 312-0122 to get your project on the schedule.
Typical estimated costs in Spring Valley run $3,500 to $10,000, with the final price set by a written line-item estimate. Tile and glass, fixture brand and the condition behind the tub wall all affect where you land in that range. If you want the lower end, a standard tile with a Delta or American Standard valve keeps the budget in check. Call (844) 312-0122 for a free estimate, and we’ll itemize the work so you can compare it fairly.
Yes, we work with all four, along with the rest of our eight-brand lineup. Delta and American Standard cover most everyday conversions well, while Toto and Grohe suit design-forward builds and premium plumbing standards. We’ll tell you honestly when your existing valve is worth keeping and when it should be replaced during the conversion. Call (844) 312-0122 and we’ll spec the right fixture for your budget and your space.
Same-day service is available when the schedule allows. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We’re closed on Saturday. Call (844) 312-0122 to check availability for your Spring Valley conversion.
We confirm the workmanship warranty terms in your written estimate so you know exactly what’s covered before work starts. The Schluter waterproofing assembly and the fixture manufacturers carry their own coverage, which we review with you at the walkthrough. If something goes wrong with the work we performed, you have a clear path to a fix. Call (844) 312-0122 with any warranty question before you sign.
Clear the bathroom and the path to it, remove personal items from the vanity, and plan for the bathroom to be out of use during the build. If it’s your only shower, we’ll talk through timing in the estimate so you can arrange an alternative. Keep one parking spot open for material delivery. Call (844) 312-0122 and we’ll walk you through what to expect on day one.
Schedule Your Tub to Shower Conversion Service in Spring Valley Today
Ready to trade the step-over tub for a walk-in shower built to last? Call (844) 312-0122 for a free, no-obligation estimate on your Spring Valley conversion. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get a written line-item quote, Schluter waterproofing behind the tile, and a shower you can use comfortably for years. Let’s get your bathroom on the schedule.
Written by the team at Bathroom Remodeling Spring Valley.










